Skip to content
Criée

Computing an auction price

Cumulative demand and supply, maximum quantity, tie-break rules: you compute, the engine checks.

Lesson 513 min

By the end of this lesson

  • Calculate demand, supply and tradable quantity at each price
  • Break a tie between two candidate prices using the unexecuted surplus
  • Work out who is filled at the single price, and for what quantity
In this lesson5

In a call auction, nobody trades while orders are coming in. At the set time, all orders are matched at once and a single price is chosen for everyone. That price can be computed by hand in four columns; this is what you will learn here.

The call auction on the BVMAC

The BVMAC general regulation defines the call auction as matching all the orders previously entered and setting a single price (BVMAC general regulation 2025, art. 14). Since notice No. 057/2023, the BVMAC holds a call auction every business day, Monday to Friday (notice No. 057/2023/BVMAC/DG). According to the published timetable, pre-opening runs from 9:00 to 11:00 and the auction takes place at 11:00: one auction per day (BVMAC, session timetable).

Call auction

The trading method in which all accumulated orders are matched at once, at a single price.

In plain wordsThe cattle market at the set hour

Imagine a cattle market where nobody may close a deal during the morning. Buyers and sellers only leave their terms: how many animals, at what highest price to buy, or lowest price to sell. At the set hour, everything is laid out and the single price at which the most animals change hands is found. Everyone then trades at that same price, even those who were ready to pay more or sell for less. Those whose price falls exactly on the chosen price may be served only in part.

The method, column by column

We use the reference algorithm from Euronext's trading manual (Euronext Trading Manual, 2021, sections 3.1.1 to 3.1.4):

  1. Candidate prices: the limits present in the book.
  2. Cumulative demand at each price p: all buy orders willing to pay p or more, plus market buy orders.
  3. Cumulative supply at each price p: all sell orders willing to sell at p or less, plus market sell orders.
  4. Tradable quantity = the smaller of the two. Keep the price that maximises it.

Writing D(p)D(p) for cumulative demand and S(p)S(p) for cumulative supply at price pp, the tradable quantity is:

V(p)=min⁡(D(p), S(p))V(p) = \min\big(D(p),\, S(p)\big)

Eight ordersFictional

Buy: Awa 40 at 10,200, Chantal 30 at 10,100, Fabrice 50 at 10,000, Grâce 20 at market. Sell: Bertrand 30 at 9,900, Esther 40 at 10,000, Didier 30 at 10,100, Hervé 50 at 10,200.

At 10,100: demand = 40 + 30 + 20 = 90 (Fabrice will not pay 10,100); supply = 30 + 40 + 30 = 100 (Hervé wants 10,200); tradable = min(90, 100) = 90.

Do the same calculation at 9,900, 10,000 and 10,200 before entering your answer.

Exercise 1: a single maximum

Buy

  • Awa40 × 10,200
  • Chantal30 × 10,100
  • Fabrice50 × 10,000
  • Grâce20 × at market

Sell

  • Bertrand30 × 9,900
  • Esther40 × 10,000
  • Didier30 × 10,100
  • Hervé50 × 10,200

Reference price: 10,000

At the single price of 10,100, Awa, who was willing to pay 10,200, pays 10,100. Orders more aggressive than the price are filled in full; at a limit equal to the price, filling follows time priority (Euronext Trading Manual, 2021, section 3.1): Didier, selling at exactly 10,100, is filled for only 20 shares out of 30.

The life of an order in an auction

Didier's order, selling at exactly 10,100, from pre-opening until the evening. The price and the quantity filled are computed by the engine from the eight orders of exercise 1.

The life of an order in an auction1/7

Didier sells

Didier sells 30 shares, limit 10,100 XAF, day validity.

At a price of 10,100, why does Didier sell only 20 shares out of 30?

When several prices tie

If several prices give the same maximum quantity, Euronext breaks the tie as follows:

  1. the price leaving the smallest unexecuted surplus (|demand − supply|);
  2. then the price closest to the reference price, usually the last price.
Exercise 2: break the tie with the surplus

Buy

  • Awa60 × 10,100
  • Chantal40 × 10,000

Sell

  • Bertrand60 × 10,000
  • Esther30 × 10,100

Reference price: 10,000

Exercise 3: break the tie with the reference price

Buy

  • Awa50 × 10,100

Sell

  • Bertrand50 × 10,000

Reference price: 10,150

Reference price

On the BVMAC, the previous session's closing price, adjusted for corporate actions (BVMAC general regulation 2025, art. 171).

The auction algorithm the BVMAC applies today is not confirmed: no current text describes it. The only text found is a 2008 draft instruction, which set out the same sequence with one more rule between the surplus and the reference price: the side of the surplus (draft instruction No. 2 of 2008, section 2.1.2). The portal's engine applies this four-rule order; it gives the same result as Euronext except when that intermediate rule decides.

Edge cases and a common mistake

  • Looking for the price where demand equals supply. You keep the price that maximises the smaller of the two, not the one where they cross exactly. In exercise 1 no price gives demand = supply, yet the price exists.
  • Forgetting who is filled at the limit. Orders more aggressive than the price are filled in full; at the limit equal to the price, filling follows the time priority seen in lesson 4. That is Didier's case.
  • Keeping only market orders. If only market orders can be executed against each other, they trade at the reference price (Euronext Trading Manual, 2021, section 3.1).

The full table for exercise 1Fictional

  • At 9,900: demand 40 + 30 + 50 + 20 = 140; supply 30; tradable 30.
  • At 10,000: demand 140; supply 30 + 40 = 70; tradable 70.
  • At 10,100: demand 40 + 30 + 20 = 90; supply 70 + 30 = 100; tradable 90.
  • At 10,200: demand 40 + 20 = 60; supply 100 + 50 = 150; tradable 60.
  1. Maximum: 90 shares, at 10,100 only. No tie-break rule is needed.
  2. On the buy side, demand at 10,100 is filled in full: Awa 40, Chantal 30, Grâce 20 (at market).
  3. On the sell side, Bertrand (30) and Esther (40) are more aggressive than the price: 70 shares. Didier, at the limit, receives 90 − 70 = 20 shares. Hervé, at 10,200, sells nothing.
  4. Amount traded: 90 × 10,100 = 909,000 XAF, at the same price for everyone.

Without scrolling up: in order, which rules set the auction price according to Euronext?

Your turn

At a price p, cumulative demand counts...

1At a price p, cumulative demand counts...

Demand 120, supply 80 at a given price. The tradable quantity is...

2Demand 120, supply 80 at a given price. The tradable quantity is...

Two prices give 60 shares traded; surpluses +40 and −30. Euronext keeps...

3Two prices give 60 shares traded; surpluses +40 and −30. Euronext keeps...

A buyer limited at 10,200 and an auction price of 10,100. The buyer pays...

4A buyer limited at 10,200 and an auction price of 10,100. The buyer pays...

At the chosen price, demand is 90; sellers more aggressive than the price total 70. The seller at the limit receives...

5At the chosen price, demand is 90; sellers more aggressive than the price total 70. The seller at the limit receives...

Read next: Euronext Trading Manual (5 juillet 2021)

A question? Ask your teacher, or an AI assistant, giving it the title of this lesson.

Share:WhatsAppLinkedIn

Going further